Strombea
Senior Member
- Location
- Prescott, Arizona, USA
I had a situation pulling in #500 AL. into a 4" pipe. @ 200 ft Tugger stalled and after a day of troubleshooting and digging found that the rope had melted to the inside of the PVC 90. I was using Right Rope LLC. 7/16" Polyester Pulling Rope
Im looking at The iTool PS916-300 - 9/16 Inch Pulling Rope
Any recommendations? Rope Material that wont melt?
What did I do wrong.
BTW we just pulled half the length and used repair couplers, so job is all good
Im looking at The iTool PS916-300 - 9/16 Inch Pulling Rope
Any recommendations? Rope Material that wont melt?
What did I do wrong.
BTW we just pulled half the length and used repair couplers, so job is all good