230.43 tells you what is permitted for wiring methods for service conductors. there is a list of 20 items there. NM cable is not on the list.Sorry guys don't do much work with nm cable in used to using ac/mc bx etc.. what cable has to be used to feed the main service panel coming out of the service disconnect outside
Sent from my SM-G965U using Tapatalk
Does anyone know in point pleasant the pipco rules in regards to how far you can run SECs from the meter to the main service panel
Sent from my SM-G965U using Tapatalk
We plan to use a meter pan then offset nipple into an out door disconnect
Sent from my SM-G965U using Tapatalk
We plan to use a meter pan then offset nipple into an out door disconnect
Does anyone know in point pleasant the pipco rules in regards to how far you can run SECs from the meter to the main service panel
Does anyone know in point pleasant the pipco rules in regards to how far you can run SECs from the meter to the main service panel
Sent from my SM-G965U using Tapatalk
Is the outdoor disconnect the "service disconnect"?We plan to use a meter pan then offset nipple into an out door disconnect
Sent from my SM-G965U using Tapatalk
Are the refrigerator and the stove/hood considered sabc I don't believe so Wich means I can run #14 for those as well and the dishwasher correct?outside of local rules, NEC requires 20 amp circuits for bath receptacles, laundry, more recently garage receptacles, and all the SABC's.
In the bathroom you must have 20 amp circuit to receptacle outlets, but have some choices of how to do them. You can put all receptacles in all baths on a single or multiple 20 amp circuits, can not feed other outlets if more than one bathroom is supplied by a circuit. Or you can run a single 20 amp circuit to an individual bath and put both lighting and receptacle outlets on it, but can not feed any outlets outside that bath.
Lighting outlets in a bath can be on a general purpose circuit that supplies other rooms - typically will be bedrooms but is not limited to those either, can be any circuit that doesn't have any restrictions on what can be served. Bath rooms do not require AFCI protection. Lighting circuit in a bathroom that is also serving other areas that do require AFCI will end up being AFCI protected anyway because the entire circuit is required to be protected as a general rule.