purduephotog
Member
- Location
- Rochester, NY, USA
Please accept my apologies for the simplicity of this question. I've used this forum in the past for research and found it a wonderful source of helpful knowledge.
I was checking for what was code for an AC-to-DC power supply, to wire low voltage LED (24V, 60W < 96W).
I see this item ( http://www.goodmart.com/products/diode-led-lo-pro-junction-box-di-0980.htm ) and
this NEC reference:
http://ecmweb.com/content/code-rules-low-voltage-lighting
http://www.q-tran.com/sites/default/files/NEC article 411.pdf
However most of the supplies I have have screw terminals, so I can't exactly isolate them in another compartment- and adding a set of pigtails would seem silly.
I also have come up pretty much blank trying to find similar boxes- I saw one power supply stuffed inside a 2 gang metal junction box which (would seem not to) provide isolating the inputs.
What am I missing?
Thank you in advance-
I was checking for what was code for an AC-to-DC power supply, to wire low voltage LED (24V, 60W < 96W).
I see this item ( http://www.goodmart.com/products/diode-led-lo-pro-junction-box-di-0980.htm ) and
this NEC reference:
http://ecmweb.com/content/code-rules-low-voltage-lighting
http://www.q-tran.com/sites/default/files/NEC article 411.pdf
However most of the supplies I have have screw terminals, so I can't exactly isolate them in another compartment- and adding a set of pigtails would seem silly.
I also have come up pretty much blank trying to find similar boxes- I saw one power supply stuffed inside a 2 gang metal junction box which (would seem not to) provide isolating the inputs.
What am I missing?
Thank you in advance-