where can i find the limit on voltage loss for low voltage circuits. i looked in the nfpa 79 and 02 codebook under article 725, but didn't find it.
i may have overlooked it. i also read another post relating to volt drop, but they cited the canadian code.
i want to limit the loses to 2% and another engineer wants 5% as the max limit.
this is for plc inputs such as limit switches, photo cells. outputs will be beacons, buzzers, and valves.
thanks in advance.
i may have overlooked it. i also read another post relating to volt drop, but they cited the canadian code.
i want to limit the loses to 2% and another engineer wants 5% as the max limit.
this is for plc inputs such as limit switches, photo cells. outputs will be beacons, buzzers, and valves.
thanks in advance.