flywright52
Member
- Location
- Missouri
I will be swapping out an old 200 amp FP residential panel for a customer in a couple of weeks. I believe this will be a panel-only swap since the entrance cable is in good condition and long enough for a new panel. Since this is my first solo swap, I thought I would ask the experts for some advice.
1. Do you normally mount the new panel on treated plywood? Current panel is mounted directly to the concrete wall. I've seen both installations in our area.
2. How do you provide temporary power? I will be working in a basement and will need lights and power for the hammer drill.
1. Do you normally mount the new panel on treated plywood? Current panel is mounted directly to the concrete wall. I've seen both installations in our area.
2. How do you provide temporary power? I will be working in a basement and will need lights and power for the hammer drill.