Stainless sleeves

[Alwayslearningelec]

Need 3” stainless steel sleeves about 6’ long. Would you just get pipe in 10’ lengths and cut and put bushings on or get specially made sleeve? Ty

 

[zbang]

For stainless there's no way that I'd....
buy 10' lengths and waste 4'.
cut it myself.

Try a local pipe supplier, would schedule 10 tubing do the job? They'll cut to length.

 

[Cow]

I agree.

Local pipe supplier, they might be able to get it in 20 or 40 foot sticks and cut it done for you. Less waste on their end would probably save you money too.

 

[kwired]

find company that does stainless pipelines and other stainless fabrication - usually they work for food processing industries, or even some maintenance dept in those plants may be able to help you. Could weld any accessory, fitting, etc. you may need to it as well, like some sort of stainless bushing on the ends.

 

[infinity]

I agree with the others buy them from someone already cut to length. What are they for?

 

[Hv&Lv]

Need 3” stainless steel sleeves about 6’ long. Would you just get pipe in 10’ lengths and cut and put bushings on or get specially made sleeve? Ty

How many? Maybe for a couple, but not for a bunch. At about $8-9 per ft you could have a bunch of money laying around as scrap if it’s a lot.
Do as the others have suggested...

 

[Alwayslearningelec]

Nedd about (6) 5' lengths. For LV cables.