Farklesnarf
Member
- Location
- Las Vegas
- Occupation
- Electrical PM
Can someone explain why the neutral is shown from 30amp breaker to the spa neutral, instead of from main panel bus to bus?
Spa GFCI
- Thread starter Farklesnarf
- Start date
brantmacga
Señor Member
- Location
- Georgia
- Occupation
- Former Child
My guess would be that the 30A GFCI breaker is feeding a couple of 120v pumps, and the 20A is a 240v heat pack.
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
I don't understand your question. Which neutral wire are you asking about?
brantmacga
Señor Member
- Location
- Georgia
- Occupation
- Former Child
The 30A breaker shows a load neutral connected at the breaker while the 20A breaker only shows line connections.
curt swartz
Electrical Contractor - San Jose, CA
- Location
- San Jose, CA
- Occupation
- Electrical Contractor
It does show a #8 neutral from the main panel neutral buss to the SPA panel neutral buss? Both GFCI breakers require line neutrals. The 30 amp GFCI breaker is feeding loads that require a branch circuit neutral.
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
This ^