dirtynails
Member
- Location
- NJ
Working on an ancient apartment with 2 really old circuits fed into the 20 year old panel, the kitchen and bath had new circuits at that time. So there's lights and 2 outlets on each. I can simply replace the outlets with GFCIs, or replace the breakers. The cost difference isn't much, like $80 vs 100. I know I need to use the UNGROUNDED labels on the plates, but which would be best practice?
If I really wanted to cheap out I could probably do both circuits on one breaker. Total would be 4 outlets and 3 ceiling lights in the 3 room apt, and the bedroom has an outlet on a modern circuit by the window for an AC.
If I really wanted to cheap out I could probably do both circuits on one breaker. Total would be 4 outlets and 3 ceiling lights in the 3 room apt, and the bedroom has an outlet on a modern circuit by the window for an AC.