adula
New member
- Location
- Rocksprings, TX
Hi,
I ran across this site while searching and saw an old thread on rewiring a 12 lead generator. I rewired the unit in 1999 to supply 3 120 VAC lines, but now need 240 VAC to power our 1 1/2 HP deep well pump. I am confused after reading the old thread. I would like a 240 VAC line and a 120 VAC line. The current configuration is as follows: Leads 10,11, and 12 tied together to the ground buss; Lines 4, 5 , and 6 tied together; Leads 3 and 9 tied together; Leads 2 and 8 tied together, and Leads 1 and 7 tied together, The last set gives me 120 VAC from each pair. Can someone help me with rewiring of the 12 leads? In our last move I lost the Thermoking manuals which had the information.
Thanks,
Alex
I ran across this site while searching and saw an old thread on rewiring a 12 lead generator. I rewired the unit in 1999 to supply 3 120 VAC lines, but now need 240 VAC to power our 1 1/2 HP deep well pump. I am confused after reading the old thread. I would like a 240 VAC line and a 120 VAC line. The current configuration is as follows: Leads 10,11, and 12 tied together to the ground buss; Lines 4, 5 , and 6 tied together; Leads 3 and 9 tied together; Leads 2 and 8 tied together, and Leads 1 and 7 tied together, The last set gives me 120 VAC from each pair. Can someone help me with rewiring of the 12 leads? In our last move I lost the Thermoking manuals which had the information.
Thanks,
Alex