ptonsparky
Tom
- Occupation
- EC - retired
Medium sized.
My help came across this today while replacing a branch circuit CB. Wire on to right lug is burnt back towards where it enters the enclosure. Obviously that lug has been replaced once or never was the correct one. My local CH distributor questioned why the buss extensions were on there. He has the lugs that would typically utilize the two screws holding the extensions on.
Anyone familiar enough with this brand to answer that question?
Any idea what those screws should be torqued to? My help failed to ask that question when they picked up the lugs and new wire.
Hopefully the buss itself hasn’t sustained damage. We will know in the morning