Went on a service call, residential call, GFCI in the garage was tripped, unplugged all load on the circuit, it reset fine. Any load applied would trip unit. Any load from any of the 4 exterior and garage outlets on the circuit. Replaced the GFCI, same thing happened, it reset, any load would trip the GFCI. took a plug apart, when the unit was tripped, got 76 volts from neutral to ground. I will be going back to trace wires and troubleshoot. Am I missing something basic? Keep thinking I am. Will bring another GFCI to see if it is just 2 bad GFCI's doing the same thing. It didn't seem likely but maybe?
Input?
Thanks in advance
Input?
Thanks in advance