Kloozy
New User
- Location
- Indianapolis,IN
- Occupation
- Electrician
I have 2 RTUs that aren’t big enough to require duct detection. However they have factory installed duct detectors. Am I required to monitor these devices?
This is big warehouse with your typical FA system. 15 of the 17 RTUs are being monitored. But all 17 came with factory installed detectors.
In the past I’ve always had to monitor these detectors. However when I asked, was told they were too small to require it. I can’t find any code directly stating anything beyond CFM minimums. Trying to figure out, is it required to monitor all installed detection? Imo, whether the detection is required is a moot point once it’s installed.
But I’ve been wrong once or twice
hoped maybe one of you guys would know. Thanks.
This is big warehouse with your typical FA system. 15 of the 17 RTUs are being monitored. But all 17 came with factory installed detectors.
In the past I’ve always had to monitor these detectors. However when I asked, was told they were too small to require it. I can’t find any code directly stating anything beyond CFM minimums. Trying to figure out, is it required to monitor all installed detection? Imo, whether the detection is required is a moot point once it’s installed.
But I’ve been wrong once or twice
![Rolling on the floor laughing :rofl: 🤣](https://cdn.jsdelivr.net/joypixels/assets/6.6/png/unicode/64/1f923.png)