mgookin
Senior Member
- Location
- Fort Myers, FL
I need to make 1/2 pvc offsets in production run lots of 100 to 1,000 pcs per run.
The offset is 1.5".
They only need to be long enough to accomplish the offset. I'm guessing that's around 8-12" long???
I'm thinking toaster oven. If it works I can get a few ovens.
Reading online if you uniformly heat the pipe to 225-275F it will be at optimal condition for bending and not distorting as it cools.
Anyone think I'm overlooking something?
Unless anyone knows where I can get them cheap?
The offset is 1.5".
They only need to be long enough to accomplish the offset. I'm guessing that's around 8-12" long???
I'm thinking toaster oven. If it works I can get a few ovens.
Reading online if you uniformly heat the pipe to 225-275F it will be at optimal condition for bending and not distorting as it cools.
Anyone think I'm overlooking something?
Unless anyone knows where I can get them cheap?