Alumaflex SER 4/0 4/0 4/0 2/0 in Mobile home

[Bill7532]

1. Can I use Alumaflex SER 4/0 4/0 4/0 2/0 from the disconnect to the panel? I know I can't run it conduit period.
2. If I can use it, can I run it within the exterior 2x6 wall into the attic space and down to the panel in the laundry room.
3. Can I run it under the mobile home? from the disconnect to the panel? Not buried but attached to the frame or floor joists?

Any advise would be appreciated.

Thank you,

V/r

Bill

 

[augie47]

Based on info from your profile:
[FONT=&quot]I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the top right corner of the post.[/FONT]
[FONT=&quot] [/FONT]
[FONT=&quot] [/FONT]