sfav8r
Senior Member
- Location
- San Francisco Bay Area
We ran across a strange installation last week. Basically there were 2 under ground power feeds to the same bldg. It is easy to see how this happened because even though it is one bldg. it's on the corner and 1/2 the addresses are on one street and 1/2 are on the other. At any rate, since we're upgrading the service, poco wants us to eliminate one service and utilize the other. There are a total of 8 units, normally this would be pretty straight forard, but one of the units is a mom and pop grocery store. I believe what I need to do is the following:
1) The 7 units of resi get calculated just like any other resi bldg.
2) The store falls under commercial and all of the fixed loads like freezers, refer boxes etc are calculated by nameplate rating.
Is this correct?
Thnaks.
1) The 7 units of resi get calculated just like any other resi bldg.
2) The store falls under commercial and all of the fixed loads like freezers, refer boxes etc are calculated by nameplate rating.
Is this correct?
Thnaks.