You have got to see this

Status
Not open for further replies.

Dennis Alwon

Moderator
Staff member
Location
Chapel Hill, NC
Occupation
Retired Electrical Contractor
This fixture's rating makes no sense and it is hard to believe it is manufactured. Check out the info from the site... It doesn't make sense



wall-light-lucellino-nt-with-goose-feather-wings-5026028-33_512x512.jpg
 

gadfly56

Senior Member
Location
New Jersey
Occupation
Professional Engineer, Fire & Life Safety
This fixture's rating makes no sense and it is hard to believe it is manufactured. Check out the info from the site... It doesn't make sense



wall-light-lucellino-nt-with-goose-feather-wings-5026028-33_512x512.jpg
I found it at another web site, and it says "not UL/ETL listed". What a surprise. :rolleyes:
 

LarryFine

Master Electrician Electric Contractor Richmond VA
Location
Henrico County, VA
Occupation
Electrical Contractor
I get the impression there is a transformer in the base and the bulb itself is low voltage, probably 12v.
 

LarryFine

Master Electrician Electric Contractor Richmond VA
Location
Henrico County, VA
Occupation
Electrical Contractor
"This product is the NT version with the built in transformer. cUL LISTED "
"1 x 35W Halogen - comes with built in Transformer "
 

Dennis Alwon

Moderator
Staff member
Location
Chapel Hill, NC
Occupation
Retired Electrical Contractor
I was thinking that it must be low voltage and perhaps the light bulb glass part unscrews to access the halogen inside.
 

Besoeker3

Senior Member
Location
UK
Occupation
Retired Electrical Engineer
It's art dude. Where is your sense of aesthetics.... LOL

It also matters as to whether 120V is sitting there exposed. haha
Well, yeah, I guess................:)
And then there is the frightening thought that we sparkies could zonk it up at 230V up their Khyber pass!!!
 

Bluegrass Boy

Senior Member
Location
Texas
Occupation
Commercial/ Industrial/ Maintenance Electrician
I zoomed in on the base of the bulb, and looks like the wire is stripped and soldered to the bottom of the base. ⚡💥
 

romex jockey

Senior Member
Location
Vermont
Occupation
electrician
It gets better for $590

16_Birdy_Ingo_Maurer_chairholder_de.jpg



or $490

BirdiesNest5.jpg



After reading it all it appears it is 24v and that is an A19 base bulb. You will have to solder it to change it or so it appears. I assume LED
man, just when you think you've seen enough goofy fixtures, it looks like the chickens got into my stockroom! ~RJ~
 
Status
Not open for further replies.
Top