Wiring for 2x4 LED 0-10 volt fixture

[T74]

Does anyone have experience with wiring 2x4 fixtures for 0-10 volt dimming.

I was planning on using MC-PCS, which is MC with the two dimming wires in it (purple and gray)

Problem is that the j box for the light fixtures has separate sections for line voltage and dimming. Do I have to run separate cables?

Thanks

 

[LarryFine]

While a PITA, you could loop a short length of MC sheath with two wires in it from one section to the other.

 

[Little Bill]

Duplicate, see here: https://forums.mikeholt.com/threads/0-10-volt-wiring-for-2x4-fixtures.2551286/#post-2552767