Shielded XLPE in RSC

[rayramgar]

Hello everyone.
Can anyone please comment on my situationer.
I have a medium voltage supply line at 34.5KV. My feeder is 3-80mmsq XLPE and it was installed in 3-100mmsq RSC. That is, one cable installed inside one RSC.
What are the probable consequence/s of such installation? What code provisions describe or instructs on such installation?
Please, I need feedback. Thanks.

 

[roger]

Re: Shielded XLPE in RSC

As far as the NEC 300.35 will address this which will take you back to 300.20. Even with out a code reference, basic theory concerning inductive heating would be the key.

Roger