Pool light bonding (pics)

Status
Not open for further replies.

NinjaWorf

New User
Location
Mesa, AZ
Occupation
UPS
My pool being built is being bonded through the skimmer. So the pool light niche is not bonded. Does a ground wire still need to be installed on the inside grounding strip that also attaches to the bonding lug on the outside of the niche? I hope this makes sense. Light being installed is pentair 5g light. I have had several issues with this pool light not and the installer being lazy, so I want to make sure all is good.

** I can't post pics but here is a link to another site I posted on before I found this one**

Pics
 

Little Bill

Moderator
Staff member
Location
Tennessee NEC:2017
Occupation
Semi-Retired Electrician
I would suggest you get either an electrician experienced with pools or your electrical inspector to check this. For one, we can't see what kind of light you have and two, we aren't allowed to help people who are not in the electrical industry. I am closing this thread in accordance with the Forum rules.
 
Status
Not open for further replies.
Top