I need some info! It is making me nuts, (Well, nuttier). I received some info on the pool ladder cups that have a groove cut into it for a #8 solid for the grid bonding and is secured by a wire binding secrew. according to article 110.14 (a) a wire bind screw can only be permitted to secure a # 10 or smaller. how can UL list something in direct conflict with the code??? I require mechanical lugs to be installed on the cups.
Pool ladder/rail cups
- Thread starter necbuff
- Start date
- Status
sandsnow
Senior Member
- Location
- Southern California
Re: Pool ladder/rail cups
I assume you are an AHJ. As such you can ask UL. Go to this link: https://www.ul.com/auth/regcon.cfm
I've used this a umber of times. Response may be little slow due to there re-org at this time.
If you do please post their response.
I assume you are an AHJ. As such you can ask UL. Go to this link: https://www.ul.com/auth/regcon.cfm
I've used this a umber of times. Response may be little slow due to there re-org at this time.
If you do please post their response.
- Status