mobile home bonding?

Status
Not open for further replies.

Justjim

New User
Location
Cora Wyoming
I am going to apologize right now this is my first post on any website and if I had 6 more wits I would half witted. So here it goes. I have looked fairly close to art. 550 and I am not seeing where I should bond the frame of the mobile home to the 2 ground rods at the service. I am looking for some clarification.
 

ActionDave

Moderator
Staff member
Location
Durango, CO, 10 h 20 min without traffic from wing
Occupation
wire pulling grunt
I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.
 
Status
Not open for further replies.
Top