Have fun with this 66 block!
- Thread starter 480sparky
- Start date
- Status
zbang
Senior Member
- Location
- Roughly 5346 miles from Earls Court
You just need to adjust the 2x4 with a sawzall first.
hbiss
EC, Westchester, New York NEC: 2014
- Location
- Hawthorne, New York NEC: 2014
- Occupation
- EC
At least you can see it. Half the time there is so much junk piled in that room that you can't even find it or the equipment its connected to.
-Hal
-Hal
PaulMmn
Senior Member
- Location
- Union, KY, USA
- Occupation
- EIT - Engineer in Training, Lafayette College
a needle-nosed pliers with a bend in the middle (they're a commercial product) makes an adequate punch-down tool... would probably reach under the 2x4... but the pliers has a habit of shorting out adjacent rows.
hbiss
EC, Westchester, New York NEC: 2014
- Location
- Hawthorne, New York NEC: 2014
- Occupation
- EC
I would require that the customer move the shelving out of the way and call me when it's been done. End of story.
-Hal
grich
Senior Member
- Location
- MP89.5, Mason City Subdivision
- Occupation
- Broadcast Engineer
Ditto. I'm not breaking my back or doing any heroics to cover their stupid.
dpcarls1598
Master Electrician
- Location
- Minnesota, USA
- Occupation
- Master Electrician
That there is one of those new 33 blocks. ?
gadfly56
Senior Member
- Location
- New Jersey
- Occupation
- Professional Engineer, Fire & Life Safety
OK, thread winner so far! :lol:
- Status