Generator Inlet Cord Holder

[tom baker]

Installed a generator inlet about 4 ft from ground - used existing hole, plus its easier to plug in. I took a few pieces of wood and made a cord holder to take strain off inlet. Two vertical pieces are just wider than the 10-4 cord and the horizontal piece swings down to hold the cord.

 

[Little Bill]

Duplicate
See here:

Generator Inlet Cord Holder

Installed a generator inlet about 4 ft from ground - used existing hole, plus its easier to plug in. I took a few pieces of wood and made a cord holder to take strain off inlet. Two vertical pieces are just wider than the 10-4 cord and the horizontal piece swings down to hold the cord. I made my...

forums.mikeholt.com