Generator Inlet Cord Holder

Status
Not open for further replies.

tom baker

First Chief Moderator
Staff member
Installed a generator inlet about 4 ft from ground - used existing hole, plus its easier to plug in. I took a few pieces of wood and made a cord holder to take strain off inlet. Two vertical pieces are just wider than the 10-4 cord and the horizontal piece swings down to hold the cord.
 

Attachments

Little Bill

Moderator
Staff member
Location
Tennessee NEC:2017
Occupation
Electrician
Duplicate
See here:
 
Status
Not open for further replies.
Top