Generac standby generator neutral

[LostLuggage]

Hi hoping someone can help with a question. So Im trying to help out my brother he just picked up an older generac 7k standby generator to use for power for a off the grid garage only when he's there to do something. So prior he used a small Honda 2k portable generator, and just had it plugged into the plug on the front of the generator nice and easy. I went to help him wire this generator in and it only has a double pull 30a breaker no neutral location. We put a small electrical panel in the garage and drove a ground rod in for the panel, but Im not sure what to do about the lack of neutral? Hoping there's a easy solution.Thanks for any help!

 

[Little Bill]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Contractors
• Electricians
• Engineers
• Inspectors
• Instructors
• Other electrically related individuals

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.

Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.