GEC

[wmeek]

If you run GEC in a emt Conduit, do you have to use any kind of grounding connector where the gec exits the pipe

 

[ryan_618]

Re: GEC

You need to bond it at each end. See 250.64(E)

Edited for typo

[ March 08, 2004, 10:01 AM: Message edited by: ryan_618 ]

 

[wmeek]

Re: GEC

Thanks Ryan
The conduit goes from Service Disconnect to the Lease space and Conductor is open air to the water pipe within lease. My Question is , Do I just need to bond on the end where the conductor is free air, and the disconnect end is bonded by the emt point of connection

 

[ryan_618]

Re: GEC

You will need to bond both ends.

Your wlecome