Feeders to Fire Protection Panel

Status
Not open for further replies.

FaradayFF

Senior Member
Location
California
Greetings,

I'm looking to confirm that power supply feeders to fire alarm and protection panels can be run in raceways with other wiring, and need not be segregated.
I'm looking at NEC Article 760, and it is not clear that 120V power supply circuits going from existing power panel to new fire protection panels need to be in their own dedicated conduits. There is discussion about NPLFA and PLFA circuits, but my understanding is that these circuits are downstream of the fire protection panels.

Any advice would be appreciated.

Thank you,
EE
 

FaradayFF

Senior Member
Location
California
You're right, that would be branch circuit. It's probably a good practice to run the branch circuit in a dedicated pipe from reliability perspective, just not sure if that is mandated by any codes or standards.

Thanks,
EE
 
Status
Not open for further replies.
Top