Electric Radiant Floor Heating

Status
Not open for further replies.

byron

Member
Location
California
Hi All,

Does anyone know if the electric floor heat units such as "Warm Tiles" and "Nuheat" are approved. I am an inspector and I remember that there was some controversy about their approval.

I have a UL Listing (E30029) but it does not reference the brand name.

Any experience would be helpful.

Byron
 

ryan_618

Senior Member
Re: Electric Radiant Floor Heating

Byron: You are the one that approves things (see definition). I'm not sure if they are listed or not.

[ June 21, 2004, 07:38 PM: Message edited by: ryan_618 ]
 

curt swartz

Electrical Contractor - San Jose, CA
Location
San Jose, CA
Occupation
Electrical Contractor
Re: Electric Radiant Floor Heating

The manufacturers name is not shown on the product?

Below is what UL shows for the number you provided.

EASY HEAT INC E30029
31977 US 20 EAST
NEW CARLISLE, IN 46552 USA

Cable units for installation as radiant heating systems: In accordance with the National Electrical Code, Cat. Nos. 7102, 7103, 7104, 7106, 7108, 7109, 7110, 7111, 7112, 7115, 7202, 7204, 7206, 7208, 7210, 7212, 7214, 7216, 7218, 7220, 7222, 7225, 7227, 7230, 7232, 7236, 7240, 7246, 7290 thru 7299, FM-112+, -120+, -130+, -140+, -150+, -160+, -170+, -175+, -180+, -190+, -212+, -220+, -230+, -240+, -250+, -260+, -270+, -275+, -280+, -290+, -812+, -820+, -830+, -835+, -840+, -850+, -852+, -860+, -869+, -870+, -875+, -880+, -886+, -890+, -1100+, -1110+, -1115+, -1120+, -1125+,-1135+, -1150+, -1160+, -1175+, -1180+, -1190+, -1200+, -1210+, -1225+, -1230+, -1240+, -1250+, -2100+, -2110+, -2115+, -2120+, -2125+, -2135+, -2150+, -2160+, -2175+, -2180+, -2190+, -2200+, -2210+, -2225+, -2230+, -2240+, -2250+, -2260+, -2270+, -2300+, -2311+, -2320+, -2350+, -2360+, -2380+, -2400+, -2420+, -2450+, -2460+, -2480+, -2500+, -8100+, -8104+, -8110+, -8112+, -8115+, -8118+, -8125+, -8135+, -8139+, -8150+, -8156+, -8160+, -8173+, -8175+, -8190+, -8200+, -8210+, -8225+, -8230+, -8240+, -8250+, -8260+, -8270+, -8300+,-8311+, -8320+, -8350+, -8360+, -8380+, -8400+, -8420+, -8450+, -8460+.
Radiant heating cable units for installation beneath concrete floors of buildings, or for embedment within cementitious or gypsum based floors, Cat. Nos. DETS, ETS, GH, XD, XDETS, XETS with additional suffix numbers and letters.
Radiant heating cable units for installation on wooden subfloor or embedded in a masonry base, covered with tile or masonry material, Cat. No. FWC with additional suffix numbers and letters; Cat. No. FM and FT followed by additional suffix numbers.
Embedded mats for installation in sand beneath building slab, Cat. No. GS with suffix 2 to 99 incl., may or may not be followed by 1 to 11 incl., followed by X, followed by numerals 18 or 36, followed by -1, -2, -4, -5, -7 or -8, followed by numerals 6 to 42 incl.; Cat. Nos. 1 to 99 incl. may or may not be followed by 1 to 11 incl., followed by HS, followed by 4 to 144 incl., followed by -1, -2, -4, -5, -7 or -8, followed by -6 to -42 incl., may be followed by optional suffix N; Cat. No. DH followed by -1, -2, -4, -5, -7 or -8, followed by -2 to -99 incl.; Cat. No. SEC followed by -1, -2, -7 or -8, followed by -1 to -99 incl., may or may not be followed by X, followed by 18 or 36.
Embedded mats for installation in concrete floor, Cat. Nos. 1 to 99 incl. may or may not be followed by 1 to 11 incl., followed by HS, followed by 4 to 144 incl., followed by -1, -2, -4, -7 or -8, followed by -6 to -20 incl, may be followed by letter N; Cat. No. GS followed by 2 to 99 incl., may or may not be followed by 1 to 11 incl., followed by X, followed by 18 or 36, followed by -1, -2, -4, -7 or -8, followed by 6 to 22 incl.
Note: A stapling gun recommended by this manufacturer should be used during the installation of the above listed cable units.
+Catalog numbers may be suffixed by the letter "L".
 

d-smes

New member
Re: Electric Radiant Floor Heating

Byron,
While your inspecting, make sure they are fed from a GFCI as should be stated in the installation instructions.
 
Status
Not open for further replies.
Top