bushings to use when fishing wire into panels

[JoeNorm]

Are there bushings that are designed to be installed from the inside of a panel? Not just strait bushings but something with strain relief Would come in handy when fishing into the panel. Seems like this should exist.

thanks

 

[MattG0311]

Arlington makes them. I think they have them for NM and MC as well

 

[electrofelon]

What do you mean by bushing exactly? Are you talking about an NM connector?

https://www.amazon.com/Hubbell-Raco4714-Nonmetallic-Sheathed-Connector-100-Pack/dp/B005OH1CFG

 

[LarryFine]

And for MC: http://www.aifittings.com/catalog/flex-ac-mc/retrofit-snap-2-it-mc-cable-connectors/

 

[James L]

For 2 NM cables...

https://www.supplyhouse.com/Topaz-RCR50-1-2-Plastic-Cable-Connector-for-Non-Metallic-Cable?utm_source=google_ad&utm_medium=Shopping_withoutdata&utm_campaign=Shopping_Without_PLTV_data&gclid=Cj0KCQjwteOaBhDuARIsADBqRejcFerENRxRzr9fS4lJqoBe-ApADQ5IcYmNOzvs7S3FcH1TpxulL88aAnY-EALw_wcB

 

[infinity]

What do you mean by bushing exactly? Are you talking about an NM connector?

Sounds like he meant a connector not a bushing.

 

[JoeNorm]

Yes, connector. Thanks

 

[Little Bill]

Are there bushings that are designed to be installed from the inside of a panel? Not just strait bushings but something with strain relief Would come in handy when fishing into the panel. Seems like this should exist.

thanks

What do you mean when you say "fishing into the panel"? Are you talking about just adding a cable into an existing recessed panel or making up a new panel? If the former, the one linked in post #3 goes in from the inside.

 

[JoeNorm]

I meant fishing into an existing panel. That is the product I was looking for, I've just never seen them before.

 

[winnie]

They are also nice when you need to install an old work box into a tight hole.

Jon