4 Way Switch - Always Hot in Each Box

Status
Not open for further replies.

gregs86

Member
Location
10801
Occupation
Project Manager
I have 3 entrances to my room and will be installing a 2 gang box at each door. Each 2 gang box will have a 4 way switch operating the main room lights plus an additional light switch for other purposes (exterior, stair, garage, I'll call these the B switches). Do I need to bring 2 separate power feeds to each box? Or is it possible to wire my 4 ways so they are always hot and I can pull power from each 4 way to feed each respective B switch. Any recommendations would be appreciated. Thank you in advance.
 

Dennis Alwon

Moderator
Staff member
Location
Chapel Hill, NC
Occupation
Retired Electrical Contractor
I am closing this thread, in accordance with the Forum Rules.
This site is designed for:
  • Contractors
  • Electricians
  • Engineers
  • Inspectors
  • Instructors
  • Other electrically related individuals
* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
If you feel this action to be in error, feel free to contact me via PM to explain. Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.
 
Status
Not open for further replies.
Top