200 amp outdoor main disconnect.

[melly2000]

I have a 200 amp Outdoor main disconnect. I am looking to branch off of the load side of this to feed 30 amp fused AC disconnect. The model number of the disconnect is QOM2E2200NRB made by Square D. I am wondering if I can just put the number ten wire in behind the SER cable or if there is a different way to approach this. This is being considered as an option only because the disconnect is only 10 feet away compared to the panel which is 40' away and would require going through walls. Any help would be greatly appreciated.

 

[Little Bill]

I am closing this thread, in accordance with the Forum Rules.

This site is designed for:

• Electrical Contractors
• Electricians
• Engineers
• Inspectors
• Instructors

* This NEC Forum is for those in the electrical and related industries. Questions of a "How-To" nature by persons not involved in the electrical industry will be removed without notice.
Reminder to all members, if you see a questionable post, feel free to report it by clicking "Report" at the bottom left corner of the post.